{"id":6041,"date":"2021-04-06T10:50:59","date_gmt":"2021-04-06T10:50:59","guid":{"rendered":"https:\/\/www.tina.com\/blog\/?p=6041"},"modified":"2021-04-06T11:12:00","modified_gmt":"2021-04-06T11:12:00","slug":"how-to-use-the-virtual-oscilloscope-in-tinacloud-updated-version","status":"publish","type":"post","link":"https:\/\/www.tina.com\/blog\/how-to-use-the-virtual-oscilloscope-in-tinacloud-updated-version\/","title":{"rendered":"How to use the Virtual Oscilloscope in TINACloud? (updated version)"},"content":{"rendered":"\n<p class=\"wp-block-paragraph\"><a href=\"https:\/\/www.youtube.com\/watch?v=bn88PH108sE\">In this tutorial<\/a> we will demonstrate how to use the virtual oscilloscope in TINACloud.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">In practice we very often use an oscilloscope to measure, analyze and debug circuits in the time domain. So, it seems obvious that a simulated oscilloscope can be used in circuit simulation as well. However there are a few important things you must know about.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Even if you analyze the circuits in the computer with a simulated oscilloscope it is still simulation. You should not consider it as measurement, unless you use real time data acquisition for obtaining the data.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The simulated oscilloscope is very useful when you want to adjust some component values of small circuits and want to see the effect of the changes immediately, in order to fine-tune your circuit.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">We present the use of the virtual oscillator through an example: Collpitts Oscillator circuit. <\/p>\n\n\n\n<ul class=\"wp-block-list\"><li>First load the Colpitts.tsc circuit from the TINA Examples folder of TINACloud.<\/li><li>Next invoke the Oscilloscope from the T&amp;M menu,<\/li><li>then press the Run button.<\/li><\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">As a result , the Out1 signal appears. By default, the oscilloscope is in the \u201cAuto\u201d i. e., free running mode. <\/p>\n\n\n\n<h6 class=\"wp-block-heading\">To get a steady state image you should enable triggering as follows:<\/h6>\n\n\n\n<ul class=\"wp-block-list\"><li>Set the Trigger Mode to Normal<\/li><li>next, set Trigger Source to Out1<\/li><li>finally, set the Trigger Level to 300m.<\/li><\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">Consequently, the waveform is stabilized.<\/p>\n\n\n\n<h6 class=\"wp-block-heading\">With the controls\nof the Oscilloscope you can make a lot of changes on the displayed waveform. <\/h6>\n\n\n\n<p class=\"wp-block-paragraph\">Here are a few:<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">By default, on the Oscilloscope\nrising edge triggering is used, so the display starts when the signal rises\nabove the Trigger level. <\/p>\n\n\n\n<ul class=\"wp-block-list\"><li>You can also set this to falling edge triggering where the display starts when the signal falls below the Trigger level.<\/li><\/ul>\n\n\n\n<ul class=\"wp-block-list\"><li>You can also bring in the Vout signal by selecting Vout under Channel<\/li><\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">Let&#8217;s have the same vertical settings for Vout as\nfor Out1.<\/p>\n\n\n\n<ul class=\"wp-block-list\"><li>Finally, you can export the display into a diagram by pressing the Export to Diagram button under Data.<\/li><\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">To watch our tutorial and learn more please click &nbsp;<a href=\"https:\/\/www.youtube.com\/watch?v=bn88PH108sE\">here<\/a>.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">You can learn more about TINA here:<a href=\"https:\/\/www.tina.com\/\">&nbsp;www.tina.com<\/a><\/p>\n\n\n\n<p class=\"wp-block-paragraph\">You can learn more about TINACloud here:&nbsp;<a href=\"https:\/\/www.tinacloud.com\/\">www.tinacloud.com<\/a><\/p>\n","protected":false},"excerpt":{"rendered":"<p>In this tutorial we will demonstrate how to use the virtual oscilloscope in TINACloud. In practice we very often use an oscilloscope to measure, analyze and debug circuits in the time domain. So, it seems obvious that a simulated oscilloscope can be used in circuit simulation as well. However there are a few important things &hellip; <a href=\"https:\/\/www.tina.com\/blog\/how-to-use-the-virtual-oscilloscope-in-tinacloud-updated-version\/\" class=\"more-link\">Continue reading<span class=\"screen-reader-text\"> &#8220;How to use the Virtual Oscilloscope in TINACloud? (updated version)&#8221;<\/span><\/a><\/p>\n","protected":false},"author":2,"featured_media":6053,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[],"class_list":["post-6041","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-uncategorized"],"yoast_head":"<!-- This site is optimized with the Yoast SEO plugin v28.8 - https:\/\/yoast.com\/product\/yoast-seo-wordpress\/ -->\n<title>How to use the Virtual Oscilloscope in TINACloud? (updated version) - The Circuit Design Blog<\/title>\n<meta name=\"description\" content=\"How to use the Virtual Oscilloscope in TINACloud? (updated version). In this tutorial we will demonstrate how to use the virtual oscilloscope in TINACloud.\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.tina.com\/blog\/how-to-use-the-virtual-oscilloscope-in-tinacloud-updated-version\/\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"How to use the Virtual Oscilloscope in TINACloud? (updated version) - The Circuit Design Blog\" \/>\n<meta property=\"og:description\" content=\"How to use the Virtual Oscilloscope in TINACloud? (updated version). In this tutorial we will demonstrate how to use the virtual oscilloscope in TINACloud.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.tina.com\/blog\/how-to-use-the-virtual-oscilloscope-in-tinacloud-updated-version\/\" \/>\n<meta property=\"og:site_name\" content=\"The Circuit Design Blog\" \/>\n<meta property=\"article:publisher\" content=\"https:\/\/www.facebook.com\/tinadesignsuite\/\" \/>\n<meta property=\"article:published_time\" content=\"2021-04-06T10:50:59+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2021-04-06T11:12:00+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/www.tina.com\/blog\/wp-content\/uploads\/2021\/04\/Usingthe-Virtual-OscilloscopeTCModified-YTtumbnail-min.png\" \/>\n\t<meta property=\"og:image:width\" content=\"1280\" \/>\n\t<meta property=\"og:image:height\" content=\"720\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/png\" \/>\n<meta name=\"author\" content=\"Michael Koltai\" \/>\n<meta name=\"twitter:label1\" content=\"Written by\" \/>\n\t<meta name=\"twitter:data1\" content=\"Michael Koltai\" \/>\n\t<meta name=\"twitter:label2\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data2\" content=\"2 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\\\/\\\/www.tina.com\\\/blog\\\/how-to-use-the-virtual-oscilloscope-in-tinacloud-updated-version\\\/#article\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.tina.com\\\/blog\\\/how-to-use-the-virtual-oscilloscope-in-tinacloud-updated-version\\\/\"},\"author\":{\"name\":\"Michael Koltai\",\"@id\":\"https:\\\/\\\/www.tina.com\\\/blog\\\/#\\\/schema\\\/person\\\/bb1f5800a993ca0eadc86a47d55cfae7\"},\"headline\":\"How to use the Virtual Oscilloscope in TINACloud? (updated version)\",\"datePublished\":\"2021-04-06T10:50:59+00:00\",\"dateModified\":\"2021-04-06T11:12:00+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\\\/\\\/www.tina.com\\\/blog\\\/how-to-use-the-virtual-oscilloscope-in-tinacloud-updated-version\\\/\"},\"wordCount\":375,\"publisher\":{\"@id\":\"https:\\\/\\\/www.tina.com\\\/blog\\\/#organization\"},\"image\":{\"@id\":\"https:\\\/\\\/www.tina.com\\\/blog\\\/how-to-use-the-virtual-oscilloscope-in-tinacloud-updated-version\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/www.tina.com\\\/blog\\\/wp-content\\\/uploads\\\/2021\\\/04\\\/Usingthe-Virtual-OscilloscopeTCModified-YTtumbnail-min.png\",\"inLanguage\":\"en-US\"},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/www.tina.com\\\/blog\\\/how-to-use-the-virtual-oscilloscope-in-tinacloud-updated-version\\\/\",\"url\":\"https:\\\/\\\/www.tina.com\\\/blog\\\/how-to-use-the-virtual-oscilloscope-in-tinacloud-updated-version\\\/\",\"name\":\"How to use the Virtual Oscilloscope in TINACloud? (updated version) - The Circuit Design Blog\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.tina.com\\\/blog\\\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/www.tina.com\\\/blog\\\/how-to-use-the-virtual-oscilloscope-in-tinacloud-updated-version\\\/#primaryimage\"},\"image\":{\"@id\":\"https:\\\/\\\/www.tina.com\\\/blog\\\/how-to-use-the-virtual-oscilloscope-in-tinacloud-updated-version\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/www.tina.com\\\/blog\\\/wp-content\\\/uploads\\\/2021\\\/04\\\/Usingthe-Virtual-OscilloscopeTCModified-YTtumbnail-min.png\",\"datePublished\":\"2021-04-06T10:50:59+00:00\",\"dateModified\":\"2021-04-06T11:12:00+00:00\",\"description\":\"How to use the Virtual Oscilloscope in TINACloud? (updated version). In this tutorial we will demonstrate how to use the virtual oscilloscope in TINACloud.\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/www.tina.com\\\/blog\\\/how-to-use-the-virtual-oscilloscope-in-tinacloud-updated-version\\\/#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/www.tina.com\\\/blog\\\/how-to-use-the-virtual-oscilloscope-in-tinacloud-updated-version\\\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/www.tina.com\\\/blog\\\/how-to-use-the-virtual-oscilloscope-in-tinacloud-updated-version\\\/#primaryimage\",\"url\":\"https:\\\/\\\/www.tina.com\\\/blog\\\/wp-content\\\/uploads\\\/2021\\\/04\\\/Usingthe-Virtual-OscilloscopeTCModified-YTtumbnail-min.png\",\"contentUrl\":\"https:\\\/\\\/www.tina.com\\\/blog\\\/wp-content\\\/uploads\\\/2021\\\/04\\\/Usingthe-Virtual-OscilloscopeTCModified-YTtumbnail-min.png\",\"width\":1280,\"height\":720,\"caption\":\"using the virtual oscilloscope updated tumbnail\"},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/www.tina.com\\\/blog\\\/how-to-use-the-virtual-oscilloscope-in-tinacloud-updated-version\\\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/www.tina.com\\\/blog\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"How to use the Virtual Oscilloscope in TINACloud? (updated version)\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/www.tina.com\\\/blog\\\/#website\",\"url\":\"https:\\\/\\\/www.tina.com\\\/blog\\\/\",\"name\":\"The Circuit Design Blog\",\"description\":\"\",\"publisher\":{\"@id\":\"https:\\\/\\\/www.tina.com\\\/blog\\\/#organization\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/www.tina.com\\\/blog\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"en-US\"},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/www.tina.com\\\/blog\\\/#organization\",\"name\":\"The Circuit Design Blog\",\"url\":\"https:\\\/\\\/www.tina.com\\\/blog\\\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/www.tina.com\\\/blog\\\/#\\\/schema\\\/logo\\\/image\\\/\",\"url\":\"https:\\\/\\\/www.tina.com\\\/blog\\\/wp-content\\\/uploads\\\/2018\\\/07\\\/cropped-TINA_logo8.png\",\"contentUrl\":\"https:\\\/\\\/www.tina.com\\\/blog\\\/wp-content\\\/uploads\\\/2018\\\/07\\\/cropped-TINA_logo8.png\",\"width\":240,\"height\":64,\"caption\":\"The Circuit Design Blog\"},\"image\":{\"@id\":\"https:\\\/\\\/www.tina.com\\\/blog\\\/#\\\/schema\\\/logo\\\/image\\\/\"},\"sameAs\":[\"https:\\\/\\\/www.facebook.com\\\/tinadesignsuite\\\/\"]},{\"@type\":\"Person\",\"@id\":\"https:\\\/\\\/www.tina.com\\\/blog\\\/#\\\/schema\\\/person\\\/bb1f5800a993ca0eadc86a47d55cfae7\",\"name\":\"Michael Koltai\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/55ee279c69da09aa4b6d88bb27161d315e44c8687f8b45bde393391d2302673c?s=96&d=blank&r=g\",\"url\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/55ee279c69da09aa4b6d88bb27161d315e44c8687f8b45bde393391d2302673c?s=96&d=blank&r=g\",\"contentUrl\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/55ee279c69da09aa4b6d88bb27161d315e44c8687f8b45bde393391d2302673c?s=96&d=blank&r=g\",\"caption\":\"Michael Koltai\"},\"sameAs\":[\"https:\\\/\\\/www.tina.com\"],\"url\":\"https:\\\/\\\/www.tina.com\\\/blog\\\/author\\\/michael\\\/\"}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"How to use the Virtual Oscilloscope in TINACloud? (updated version) - The Circuit Design Blog","description":"How to use the Virtual Oscilloscope in TINACloud? (updated version). In this tutorial we will demonstrate how to use the virtual oscilloscope in TINACloud.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/www.tina.com\/blog\/how-to-use-the-virtual-oscilloscope-in-tinacloud-updated-version\/","og_locale":"en_US","og_type":"article","og_title":"How to use the Virtual Oscilloscope in TINACloud? (updated version) - The Circuit Design Blog","og_description":"How to use the Virtual Oscilloscope in TINACloud? (updated version). In this tutorial we will demonstrate how to use the virtual oscilloscope in TINACloud.","og_url":"https:\/\/www.tina.com\/blog\/how-to-use-the-virtual-oscilloscope-in-tinacloud-updated-version\/","og_site_name":"The Circuit Design Blog","article_publisher":"https:\/\/www.facebook.com\/tinadesignsuite\/","article_published_time":"2021-04-06T10:50:59+00:00","article_modified_time":"2021-04-06T11:12:00+00:00","og_image":[{"width":1280,"height":720,"url":"https:\/\/www.tina.com\/blog\/wp-content\/uploads\/2021\/04\/Usingthe-Virtual-OscilloscopeTCModified-YTtumbnail-min.png","type":"image\/png"}],"author":"Michael Koltai","twitter_misc":{"Written by":"Michael Koltai","Est. reading time":"2 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/www.tina.com\/blog\/how-to-use-the-virtual-oscilloscope-in-tinacloud-updated-version\/#article","isPartOf":{"@id":"https:\/\/www.tina.com\/blog\/how-to-use-the-virtual-oscilloscope-in-tinacloud-updated-version\/"},"author":{"name":"Michael Koltai","@id":"https:\/\/www.tina.com\/blog\/#\/schema\/person\/bb1f5800a993ca0eadc86a47d55cfae7"},"headline":"How to use the Virtual Oscilloscope in TINACloud? (updated version)","datePublished":"2021-04-06T10:50:59+00:00","dateModified":"2021-04-06T11:12:00+00:00","mainEntityOfPage":{"@id":"https:\/\/www.tina.com\/blog\/how-to-use-the-virtual-oscilloscope-in-tinacloud-updated-version\/"},"wordCount":375,"publisher":{"@id":"https:\/\/www.tina.com\/blog\/#organization"},"image":{"@id":"https:\/\/www.tina.com\/blog\/how-to-use-the-virtual-oscilloscope-in-tinacloud-updated-version\/#primaryimage"},"thumbnailUrl":"https:\/\/www.tina.com\/blog\/wp-content\/uploads\/2021\/04\/Usingthe-Virtual-OscilloscopeTCModified-YTtumbnail-min.png","inLanguage":"en-US"},{"@type":"WebPage","@id":"https:\/\/www.tina.com\/blog\/how-to-use-the-virtual-oscilloscope-in-tinacloud-updated-version\/","url":"https:\/\/www.tina.com\/blog\/how-to-use-the-virtual-oscilloscope-in-tinacloud-updated-version\/","name":"How to use the Virtual Oscilloscope in TINACloud? (updated version) - The Circuit Design Blog","isPartOf":{"@id":"https:\/\/www.tina.com\/blog\/#website"},"primaryImageOfPage":{"@id":"https:\/\/www.tina.com\/blog\/how-to-use-the-virtual-oscilloscope-in-tinacloud-updated-version\/#primaryimage"},"image":{"@id":"https:\/\/www.tina.com\/blog\/how-to-use-the-virtual-oscilloscope-in-tinacloud-updated-version\/#primaryimage"},"thumbnailUrl":"https:\/\/www.tina.com\/blog\/wp-content\/uploads\/2021\/04\/Usingthe-Virtual-OscilloscopeTCModified-YTtumbnail-min.png","datePublished":"2021-04-06T10:50:59+00:00","dateModified":"2021-04-06T11:12:00+00:00","description":"How to use the Virtual Oscilloscope in TINACloud? (updated version). In this tutorial we will demonstrate how to use the virtual oscilloscope in TINACloud.","breadcrumb":{"@id":"https:\/\/www.tina.com\/blog\/how-to-use-the-virtual-oscilloscope-in-tinacloud-updated-version\/#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/www.tina.com\/blog\/how-to-use-the-virtual-oscilloscope-in-tinacloud-updated-version\/"]}]},{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/www.tina.com\/blog\/how-to-use-the-virtual-oscilloscope-in-tinacloud-updated-version\/#primaryimage","url":"https:\/\/www.tina.com\/blog\/wp-content\/uploads\/2021\/04\/Usingthe-Virtual-OscilloscopeTCModified-YTtumbnail-min.png","contentUrl":"https:\/\/www.tina.com\/blog\/wp-content\/uploads\/2021\/04\/Usingthe-Virtual-OscilloscopeTCModified-YTtumbnail-min.png","width":1280,"height":720,"caption":"using the virtual oscilloscope updated tumbnail"},{"@type":"BreadcrumbList","@id":"https:\/\/www.tina.com\/blog\/how-to-use-the-virtual-oscilloscope-in-tinacloud-updated-version\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/www.tina.com\/blog\/"},{"@type":"ListItem","position":2,"name":"How to use the Virtual Oscilloscope in TINACloud? (updated version)"}]},{"@type":"WebSite","@id":"https:\/\/www.tina.com\/blog\/#website","url":"https:\/\/www.tina.com\/blog\/","name":"The Circuit Design Blog","description":"","publisher":{"@id":"https:\/\/www.tina.com\/blog\/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/www.tina.com\/blog\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-US"},{"@type":"Organization","@id":"https:\/\/www.tina.com\/blog\/#organization","name":"The Circuit Design Blog","url":"https:\/\/www.tina.com\/blog\/","logo":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/www.tina.com\/blog\/#\/schema\/logo\/image\/","url":"https:\/\/www.tina.com\/blog\/wp-content\/uploads\/2018\/07\/cropped-TINA_logo8.png","contentUrl":"https:\/\/www.tina.com\/blog\/wp-content\/uploads\/2018\/07\/cropped-TINA_logo8.png","width":240,"height":64,"caption":"The Circuit Design Blog"},"image":{"@id":"https:\/\/www.tina.com\/blog\/#\/schema\/logo\/image\/"},"sameAs":["https:\/\/www.facebook.com\/tinadesignsuite\/"]},{"@type":"Person","@id":"https:\/\/www.tina.com\/blog\/#\/schema\/person\/bb1f5800a993ca0eadc86a47d55cfae7","name":"Michael Koltai","image":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/secure.gravatar.com\/avatar\/55ee279c69da09aa4b6d88bb27161d315e44c8687f8b45bde393391d2302673c?s=96&d=blank&r=g","url":"https:\/\/secure.gravatar.com\/avatar\/55ee279c69da09aa4b6d88bb27161d315e44c8687f8b45bde393391d2302673c?s=96&d=blank&r=g","contentUrl":"https:\/\/secure.gravatar.com\/avatar\/55ee279c69da09aa4b6d88bb27161d315e44c8687f8b45bde393391d2302673c?s=96&d=blank&r=g","caption":"Michael Koltai"},"sameAs":["https:\/\/www.tina.com"],"url":"https:\/\/www.tina.com\/blog\/author\/michael\/"}]}},"_links":{"self":[{"href":"https:\/\/www.tina.com\/blog\/wp-json\/wp\/v2\/posts\/6041","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.tina.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.tina.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.tina.com\/blog\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/www.tina.com\/blog\/wp-json\/wp\/v2\/comments?post=6041"}],"version-history":[{"count":13,"href":"https:\/\/www.tina.com\/blog\/wp-json\/wp\/v2\/posts\/6041\/revisions"}],"predecessor-version":[{"id":6057,"href":"https:\/\/www.tina.com\/blog\/wp-json\/wp\/v2\/posts\/6041\/revisions\/6057"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.tina.com\/blog\/wp-json\/wp\/v2\/media\/6053"}],"wp:attachment":[{"href":"https:\/\/www.tina.com\/blog\/wp-json\/wp\/v2\/media?parent=6041"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.tina.com\/blog\/wp-json\/wp\/v2\/categories?post=6041"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.tina.com\/blog\/wp-json\/wp\/v2\/tags?post=6041"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}