{"id":7230,"date":"2024-05-08T11:19:32","date_gmt":"2024-05-08T11:19:32","guid":{"rendered":"https:\/\/www.tina.com\/blog\/?p=7230"},"modified":"2024-05-08T13:59:30","modified_gmt":"2024-05-08T13:59:30","slug":"creating-and-simulating-an-rlc-circuit-on-the-raspberry-pi-5-single-board-computer-using-tina","status":"publish","type":"post","link":"https:\/\/www.tina.com\/blog\/creating-and-simulating-an-rlc-circuit-on-the-raspberry-pi-5-single-board-computer-using-tina\/","title":{"rendered":"Creating and simulating an RLC circuit on the      Raspberry Pi 5 single board computer using TINA"},"content":{"rendered":"\n<p class=\"wp-block-paragraph\"> <br>In <a href=\"https:\/\/www.youtube.com\/watch?v=uj7MUa_nogc&amp;list=PLScrHAmLYSQCRUFsGcFVpRp0W3IvTy3Gt&amp;index=2\">this video&nbsp;<\/a> we will create and analyze an RLC circuit on the Raspberry Pi 5 single board computer with TINA. <\/p>\n\n\n\n<p class=\"wp-block-paragraph\">First you have to install the Wine Windows emulator available from the PI-Apps application. <\/p>\n\n\n\n<p class=\"wp-block-paragraph\">If Wine setup is complete you will see it in the Raspberry OS main menu, so for example you can launch the program WineCfg to configure the optimal text size of the emulated Windows applications.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Assuming you have Wine working in 64-bit mode, you can start the installation of TINA. After completion of the TINA installer, you\u2019ll find TINA in the Raspberry OS main menu (if not in the first level menu, look for it in Wine applications) so you can start it from there. <\/p>\n\n\n\n<h5 class=\"wp-block-heading\">Creating the RLC circuit <\/h5>\n\n\n\n<p class=\"wp-block-paragraph\">An RLC circuit is an electrical circuit consisting of a Resistor (R), an Inductor (L) and a Capacitor (C). After creating the circuit, we change the default values of some of the components.<\/p>\n\n\n\n<h5 class=\"wp-block-heading\">Transient Analysis<\/h5>\n\n\n\n<p class=\"wp-block-paragraph\">We Set End display time to 50 microseconds, then select the \u201cZero initial values\u201doption. Next, we add the diagram to the Schematic Editor window to store it together with the circuit schematic.<\/p>\n\n\n\n<h6 class=\"wp-block-heading\">Symbolic Analysis<\/h6>\n\n\n\n<p class=\"wp-block-paragraph\">After that, we generate the accurate closed formula describing the transient response using the Symbolic Analysis capability of TINA. Note that the closed formula exists in linear circuits only. The symbolic result describes the transient response of the circuit with an accurate analytic closed formula.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">In the following, we will show, how to Draw a diagram using the formula and compare it with the numerical result.<\/p>\n\n\n\n<h5 class=\"wp-block-heading\">AC Analysis<\/h5>\n\n\n\n<p class=\"wp-block-paragraph\">In the AC Transfer Analysis dialog, set the number of points to 500 to have a finer diagram. Using the checkboxes in the diagram group, you can determine which diagrams will be displayed. Check them all.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The AC Amplitude Characteristic appears, but at the same time the program has calculated the Phase, Nyquist, Group Delay and the AC Bode diagrams.<\/p>\n\n\n\n<h6 class=\"wp-block-heading\" id=\"mce_16\">Symbolic Analysis<\/h6>\n\n\n\n<p class=\"wp-block-paragraph\">Finally, we generate the closed formula of the AC Transfer\nFunction using Symbolic Analysis.<\/p>\n\n\n\n<p style=\"text-align:left\" class=\"has-text-color has-bright-blue-color wp-block-paragraph\"><em><strong> Content of the video<\/strong><\/em>:<\/p>\n\n\n\n<ul class=\"wp-block-list\"><li> <a href=\"https:\/\/www.youtube.com\/watch?v=uj7MUa_nogc&amp;list=PLScrHAmLYSQCRUFsGcFVpRp0W3IvTy3Gt&amp;index=2&amp;t=0s\">00:00<\/a> Introduction  <\/li><li> <a href=\"https:\/\/www.youtube.com\/watch?v=uj7MUa_nogc&amp;list=PLScrHAmLYSQCRUFsGcFVpRp0W3IvTy3Gt&amp;index=2&amp;t=127s\">02:07<\/a>  Creating the circuit and  changing the default values of some of the components <\/li><li> <a href=\"https:\/\/www.youtube.com\/watch?v=uj7MUa_nogc&amp;list=PLScrHAmLYSQCRUFsGcFVpRp0W3IvTy3Gt&amp;index=2&amp;t=261s\">04:21<\/a> Transient Analysis <\/li><li> <a href=\"https:\/\/www.youtube.com\/watch?v=uj7MUa_nogc&amp;list=PLScrHAmLYSQCRUFsGcFVpRp0W3IvTy3Gt&amp;index=2&amp;t=339s\">05:39<\/a> Symbolic Analysis: Semi-symbolic Transient<\/li><li>  <a href=\"https:\/\/www.youtube.com\/watch?v=uj7MUa_nogc&amp;list=PLScrHAmLYSQCRUFsGcFVpRp0W3IvTy3Gt&amp;index=2&amp;t=467s\">07:47<\/a> AC Analysis <\/li><li>  <a href=\"https:\/\/www.youtube.com\/watch?v=uj7MUa_nogc&amp;list=PLScrHAmLYSQCRUFsGcFVpRp0W3IvTy3Gt&amp;index=2&amp;t=555s\">09:15<\/a> Symbolic Analysis: AC Transfer<\/li><li>  <a href=\"https:\/\/www.youtube.com\/watch?v=uj7MUa_nogc&amp;list=PLScrHAmLYSQCRUFsGcFVpRp0W3IvTy3Gt&amp;index=2&amp;t=625s\">10:25<\/a> Conclusion  <\/li><\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">Click&nbsp;<a href=\"https:\/\/www.youtube.com\/watch?v=uj7MUa_nogc&amp;list=PLScrHAmLYSQCRUFsGcFVpRp0W3IvTy3Gt&amp;index=2\">here<\/a><a href=\"https:\/\/www.youtube.com\/watch?v=LJX7cWa26FE&amp;list=PLScrHAmLYSQAcKY55w-gvpUvBNL4wgQCJ&amp;index=1\">&nbsp;<\/a>to watch our video.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">You can learn more about TINACloud here:&nbsp;<a href=\"https:\/\/www.tinacloud.com\/\">www.tinacloud.com\ufeff<\/a><\/p>\n\n\n\n<p class=\"wp-block-paragraph\">You can learn more about TINA here:<a href=\"https:\/\/www.tina.com\/\">&nbsp;www.tina.com<\/a><\/p>\n\n\n\n<p class=\"wp-block-paragraph\"> <\/p>\n\n\n\n<p class=\"wp-block-paragraph\">   <\/p>\n","protected":false},"excerpt":{"rendered":"<p>In this video&nbsp; we will create and analyze an RLC circuit on the Raspberry Pi 5 single board computer with TINA. First you have to install the Wine Windows emulator available from the PI-Apps application. If Wine setup is complete you will see it in the Raspberry OS main menu, so for example you can &hellip; <a href=\"https:\/\/www.tina.com\/blog\/creating-and-simulating-an-rlc-circuit-on-the-raspberry-pi-5-single-board-computer-using-tina\/\" class=\"more-link\">Continue reading<span class=\"screen-reader-text\"> &#8220;Creating and simulating an RLC circuit on the      Raspberry Pi 5 single board computer using TINA&#8221;<\/span><\/a><\/p>\n","protected":false},"author":2,"featured_media":7280,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[],"class_list":["post-7230","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-uncategorized"],"yoast_head":"<!-- This site is optimized with the Yoast SEO plugin v28.8 - https:\/\/yoast.com\/product\/yoast-seo-wordpress\/ -->\n<title>Creating and simulating an RLC circuit on the   Raspberry Pi 5 single board computer using TINA - The Circuit Design Blog<\/title>\n<meta name=\"description\" content=\"In this tutorial video we will create and analyze an RLC circuit on the Raspberry Pi 5 single board computer using TINA.\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.tina.com\/blog\/creating-and-simulating-an-rlc-circuit-on-the-raspberry-pi-5-single-board-computer-using-tina\/\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"Creating and simulating an RLC circuit on the   Raspberry Pi 5 single board computer using TINA - The Circuit Design Blog\" \/>\n<meta property=\"og:description\" content=\"In this tutorial video we will create and analyze an RLC circuit on the Raspberry Pi 5 single board computer using TINA.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.tina.com\/blog\/creating-and-simulating-an-rlc-circuit-on-the-raspberry-pi-5-single-board-computer-using-tina\/\" \/>\n<meta property=\"og:site_name\" content=\"The Circuit Design Blog\" \/>\n<meta property=\"article:publisher\" content=\"https:\/\/www.facebook.com\/tinadesignsuite\/\" \/>\n<meta property=\"article:published_time\" content=\"2024-05-08T11:19:32+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2024-05-08T13:59:30+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/www.tina.com\/blog\/wp-content\/uploads\/2024\/05\/RLC200-TINAEnglish_Raspberry-pie_tumbnailBlog_mod2.png\" \/>\n\t<meta property=\"og:image:width\" content=\"470\" \/>\n\t<meta property=\"og:image:height\" content=\"263\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/png\" \/>\n<meta name=\"author\" content=\"Michael Koltai\" \/>\n<meta name=\"twitter:label1\" content=\"Written by\" \/>\n\t<meta name=\"twitter:data1\" content=\"Michael Koltai\" \/>\n\t<meta name=\"twitter:label2\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data2\" content=\"2 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\\\/\\\/www.tina.com\\\/blog\\\/creating-and-simulating-an-rlc-circuit-on-the-raspberry-pi-5-single-board-computer-using-tina\\\/#article\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.tina.com\\\/blog\\\/creating-and-simulating-an-rlc-circuit-on-the-raspberry-pi-5-single-board-computer-using-tina\\\/\"},\"author\":{\"name\":\"Michael Koltai\",\"@id\":\"https:\\\/\\\/www.tina.com\\\/blog\\\/#\\\/schema\\\/person\\\/bb1f5800a993ca0eadc86a47d55cfae7\"},\"headline\":\"Creating and simulating an RLC circuit on the Raspberry Pi 5 single board computer using TINA\",\"datePublished\":\"2024-05-08T11:19:32+00:00\",\"dateModified\":\"2024-05-08T13:59:30+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\\\/\\\/www.tina.com\\\/blog\\\/creating-and-simulating-an-rlc-circuit-on-the-raspberry-pi-5-single-board-computer-using-tina\\\/\"},\"wordCount\":413,\"publisher\":{\"@id\":\"https:\\\/\\\/www.tina.com\\\/blog\\\/#organization\"},\"image\":{\"@id\":\"https:\\\/\\\/www.tina.com\\\/blog\\\/creating-and-simulating-an-rlc-circuit-on-the-raspberry-pi-5-single-board-computer-using-tina\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/www.tina.com\\\/blog\\\/wp-content\\\/uploads\\\/2024\\\/05\\\/RLC200-TINAEnglish_Raspberry-pie_tumbnailBlog_mod2.png\",\"inLanguage\":\"en-US\"},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/www.tina.com\\\/blog\\\/creating-and-simulating-an-rlc-circuit-on-the-raspberry-pi-5-single-board-computer-using-tina\\\/\",\"url\":\"https:\\\/\\\/www.tina.com\\\/blog\\\/creating-and-simulating-an-rlc-circuit-on-the-raspberry-pi-5-single-board-computer-using-tina\\\/\",\"name\":\"Creating and simulating an RLC circuit on the Raspberry Pi 5 single board computer using TINA - The Circuit Design Blog\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.tina.com\\\/blog\\\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/www.tina.com\\\/blog\\\/creating-and-simulating-an-rlc-circuit-on-the-raspberry-pi-5-single-board-computer-using-tina\\\/#primaryimage\"},\"image\":{\"@id\":\"https:\\\/\\\/www.tina.com\\\/blog\\\/creating-and-simulating-an-rlc-circuit-on-the-raspberry-pi-5-single-board-computer-using-tina\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/www.tina.com\\\/blog\\\/wp-content\\\/uploads\\\/2024\\\/05\\\/RLC200-TINAEnglish_Raspberry-pie_tumbnailBlog_mod2.png\",\"datePublished\":\"2024-05-08T11:19:32+00:00\",\"dateModified\":\"2024-05-08T13:59:30+00:00\",\"description\":\"In this tutorial video we will create and analyze an RLC circuit on the Raspberry Pi 5 single board computer using TINA.\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/www.tina.com\\\/blog\\\/creating-and-simulating-an-rlc-circuit-on-the-raspberry-pi-5-single-board-computer-using-tina\\\/#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/www.tina.com\\\/blog\\\/creating-and-simulating-an-rlc-circuit-on-the-raspberry-pi-5-single-board-computer-using-tina\\\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/www.tina.com\\\/blog\\\/creating-and-simulating-an-rlc-circuit-on-the-raspberry-pi-5-single-board-computer-using-tina\\\/#primaryimage\",\"url\":\"https:\\\/\\\/www.tina.com\\\/blog\\\/wp-content\\\/uploads\\\/2024\\\/05\\\/RLC200-TINAEnglish_Raspberry-pie_tumbnailBlog_mod2.png\",\"contentUrl\":\"https:\\\/\\\/www.tina.com\\\/blog\\\/wp-content\\\/uploads\\\/2024\\\/05\\\/RLC200-TINAEnglish_Raspberry-pie_tumbnailBlog_mod2.png\",\"width\":470,\"height\":263,\"caption\":\"Simulation of an RLC circuit on a Raspberry Pi 5 single board computer\"},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/www.tina.com\\\/blog\\\/creating-and-simulating-an-rlc-circuit-on-the-raspberry-pi-5-single-board-computer-using-tina\\\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/www.tina.com\\\/blog\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Creating and simulating an RLC circuit on the Raspberry Pi 5 single board computer using TINA\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/www.tina.com\\\/blog\\\/#website\",\"url\":\"https:\\\/\\\/www.tina.com\\\/blog\\\/\",\"name\":\"The Circuit Design Blog\",\"description\":\"\",\"publisher\":{\"@id\":\"https:\\\/\\\/www.tina.com\\\/blog\\\/#organization\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/www.tina.com\\\/blog\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"en-US\"},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/www.tina.com\\\/blog\\\/#organization\",\"name\":\"The Circuit Design Blog\",\"url\":\"https:\\\/\\\/www.tina.com\\\/blog\\\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/www.tina.com\\\/blog\\\/#\\\/schema\\\/logo\\\/image\\\/\",\"url\":\"https:\\\/\\\/www.tina.com\\\/blog\\\/wp-content\\\/uploads\\\/2018\\\/07\\\/cropped-TINA_logo8.png\",\"contentUrl\":\"https:\\\/\\\/www.tina.com\\\/blog\\\/wp-content\\\/uploads\\\/2018\\\/07\\\/cropped-TINA_logo8.png\",\"width\":240,\"height\":64,\"caption\":\"The Circuit Design Blog\"},\"image\":{\"@id\":\"https:\\\/\\\/www.tina.com\\\/blog\\\/#\\\/schema\\\/logo\\\/image\\\/\"},\"sameAs\":[\"https:\\\/\\\/www.facebook.com\\\/tinadesignsuite\\\/\"]},{\"@type\":\"Person\",\"@id\":\"https:\\\/\\\/www.tina.com\\\/blog\\\/#\\\/schema\\\/person\\\/bb1f5800a993ca0eadc86a47d55cfae7\",\"name\":\"Michael Koltai\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/55ee279c69da09aa4b6d88bb27161d315e44c8687f8b45bde393391d2302673c?s=96&d=blank&r=g\",\"url\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/55ee279c69da09aa4b6d88bb27161d315e44c8687f8b45bde393391d2302673c?s=96&d=blank&r=g\",\"contentUrl\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/55ee279c69da09aa4b6d88bb27161d315e44c8687f8b45bde393391d2302673c?s=96&d=blank&r=g\",\"caption\":\"Michael Koltai\"},\"sameAs\":[\"https:\\\/\\\/www.tina.com\"],\"url\":\"https:\\\/\\\/www.tina.com\\\/blog\\\/author\\\/michael\\\/\"}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"Creating and simulating an RLC circuit on the   Raspberry Pi 5 single board computer using TINA - The Circuit Design Blog","description":"In this tutorial video we will create and analyze an RLC circuit on the Raspberry Pi 5 single board computer using TINA.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/www.tina.com\/blog\/creating-and-simulating-an-rlc-circuit-on-the-raspberry-pi-5-single-board-computer-using-tina\/","og_locale":"en_US","og_type":"article","og_title":"Creating and simulating an RLC circuit on the   Raspberry Pi 5 single board computer using TINA - The Circuit Design Blog","og_description":"In this tutorial video we will create and analyze an RLC circuit on the Raspberry Pi 5 single board computer using TINA.","og_url":"https:\/\/www.tina.com\/blog\/creating-and-simulating-an-rlc-circuit-on-the-raspberry-pi-5-single-board-computer-using-tina\/","og_site_name":"The Circuit Design Blog","article_publisher":"https:\/\/www.facebook.com\/tinadesignsuite\/","article_published_time":"2024-05-08T11:19:32+00:00","article_modified_time":"2024-05-08T13:59:30+00:00","og_image":[{"width":470,"height":263,"url":"https:\/\/www.tina.com\/blog\/wp-content\/uploads\/2024\/05\/RLC200-TINAEnglish_Raspberry-pie_tumbnailBlog_mod2.png","type":"image\/png"}],"author":"Michael Koltai","twitter_misc":{"Written by":"Michael Koltai","Est. reading time":"2 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/www.tina.com\/blog\/creating-and-simulating-an-rlc-circuit-on-the-raspberry-pi-5-single-board-computer-using-tina\/#article","isPartOf":{"@id":"https:\/\/www.tina.com\/blog\/creating-and-simulating-an-rlc-circuit-on-the-raspberry-pi-5-single-board-computer-using-tina\/"},"author":{"name":"Michael Koltai","@id":"https:\/\/www.tina.com\/blog\/#\/schema\/person\/bb1f5800a993ca0eadc86a47d55cfae7"},"headline":"Creating and simulating an RLC circuit on the Raspberry Pi 5 single board computer using TINA","datePublished":"2024-05-08T11:19:32+00:00","dateModified":"2024-05-08T13:59:30+00:00","mainEntityOfPage":{"@id":"https:\/\/www.tina.com\/blog\/creating-and-simulating-an-rlc-circuit-on-the-raspberry-pi-5-single-board-computer-using-tina\/"},"wordCount":413,"publisher":{"@id":"https:\/\/www.tina.com\/blog\/#organization"},"image":{"@id":"https:\/\/www.tina.com\/blog\/creating-and-simulating-an-rlc-circuit-on-the-raspberry-pi-5-single-board-computer-using-tina\/#primaryimage"},"thumbnailUrl":"https:\/\/www.tina.com\/blog\/wp-content\/uploads\/2024\/05\/RLC200-TINAEnglish_Raspberry-pie_tumbnailBlog_mod2.png","inLanguage":"en-US"},{"@type":"WebPage","@id":"https:\/\/www.tina.com\/blog\/creating-and-simulating-an-rlc-circuit-on-the-raspberry-pi-5-single-board-computer-using-tina\/","url":"https:\/\/www.tina.com\/blog\/creating-and-simulating-an-rlc-circuit-on-the-raspberry-pi-5-single-board-computer-using-tina\/","name":"Creating and simulating an RLC circuit on the Raspberry Pi 5 single board computer using TINA - The Circuit Design Blog","isPartOf":{"@id":"https:\/\/www.tina.com\/blog\/#website"},"primaryImageOfPage":{"@id":"https:\/\/www.tina.com\/blog\/creating-and-simulating-an-rlc-circuit-on-the-raspberry-pi-5-single-board-computer-using-tina\/#primaryimage"},"image":{"@id":"https:\/\/www.tina.com\/blog\/creating-and-simulating-an-rlc-circuit-on-the-raspberry-pi-5-single-board-computer-using-tina\/#primaryimage"},"thumbnailUrl":"https:\/\/www.tina.com\/blog\/wp-content\/uploads\/2024\/05\/RLC200-TINAEnglish_Raspberry-pie_tumbnailBlog_mod2.png","datePublished":"2024-05-08T11:19:32+00:00","dateModified":"2024-05-08T13:59:30+00:00","description":"In this tutorial video we will create and analyze an RLC circuit on the Raspberry Pi 5 single board computer using TINA.","breadcrumb":{"@id":"https:\/\/www.tina.com\/blog\/creating-and-simulating-an-rlc-circuit-on-the-raspberry-pi-5-single-board-computer-using-tina\/#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/www.tina.com\/blog\/creating-and-simulating-an-rlc-circuit-on-the-raspberry-pi-5-single-board-computer-using-tina\/"]}]},{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/www.tina.com\/blog\/creating-and-simulating-an-rlc-circuit-on-the-raspberry-pi-5-single-board-computer-using-tina\/#primaryimage","url":"https:\/\/www.tina.com\/blog\/wp-content\/uploads\/2024\/05\/RLC200-TINAEnglish_Raspberry-pie_tumbnailBlog_mod2.png","contentUrl":"https:\/\/www.tina.com\/blog\/wp-content\/uploads\/2024\/05\/RLC200-TINAEnglish_Raspberry-pie_tumbnailBlog_mod2.png","width":470,"height":263,"caption":"Simulation of an RLC circuit on a Raspberry Pi 5 single board computer"},{"@type":"BreadcrumbList","@id":"https:\/\/www.tina.com\/blog\/creating-and-simulating-an-rlc-circuit-on-the-raspberry-pi-5-single-board-computer-using-tina\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/www.tina.com\/blog\/"},{"@type":"ListItem","position":2,"name":"Creating and simulating an RLC circuit on the Raspberry Pi 5 single board computer using TINA"}]},{"@type":"WebSite","@id":"https:\/\/www.tina.com\/blog\/#website","url":"https:\/\/www.tina.com\/blog\/","name":"The Circuit Design Blog","description":"","publisher":{"@id":"https:\/\/www.tina.com\/blog\/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/www.tina.com\/blog\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-US"},{"@type":"Organization","@id":"https:\/\/www.tina.com\/blog\/#organization","name":"The Circuit Design Blog","url":"https:\/\/www.tina.com\/blog\/","logo":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/www.tina.com\/blog\/#\/schema\/logo\/image\/","url":"https:\/\/www.tina.com\/blog\/wp-content\/uploads\/2018\/07\/cropped-TINA_logo8.png","contentUrl":"https:\/\/www.tina.com\/blog\/wp-content\/uploads\/2018\/07\/cropped-TINA_logo8.png","width":240,"height":64,"caption":"The Circuit Design Blog"},"image":{"@id":"https:\/\/www.tina.com\/blog\/#\/schema\/logo\/image\/"},"sameAs":["https:\/\/www.facebook.com\/tinadesignsuite\/"]},{"@type":"Person","@id":"https:\/\/www.tina.com\/blog\/#\/schema\/person\/bb1f5800a993ca0eadc86a47d55cfae7","name":"Michael Koltai","image":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/secure.gravatar.com\/avatar\/55ee279c69da09aa4b6d88bb27161d315e44c8687f8b45bde393391d2302673c?s=96&d=blank&r=g","url":"https:\/\/secure.gravatar.com\/avatar\/55ee279c69da09aa4b6d88bb27161d315e44c8687f8b45bde393391d2302673c?s=96&d=blank&r=g","contentUrl":"https:\/\/secure.gravatar.com\/avatar\/55ee279c69da09aa4b6d88bb27161d315e44c8687f8b45bde393391d2302673c?s=96&d=blank&r=g","caption":"Michael Koltai"},"sameAs":["https:\/\/www.tina.com"],"url":"https:\/\/www.tina.com\/blog\/author\/michael\/"}]}},"_links":{"self":[{"href":"https:\/\/www.tina.com\/blog\/wp-json\/wp\/v2\/posts\/7230","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.tina.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.tina.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.tina.com\/blog\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/www.tina.com\/blog\/wp-json\/wp\/v2\/comments?post=7230"}],"version-history":[{"count":32,"href":"https:\/\/www.tina.com\/blog\/wp-json\/wp\/v2\/posts\/7230\/revisions"}],"predecessor-version":[{"id":7270,"href":"https:\/\/www.tina.com\/blog\/wp-json\/wp\/v2\/posts\/7230\/revisions\/7270"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.tina.com\/blog\/wp-json\/wp\/v2\/media\/7280"}],"wp:attachment":[{"href":"https:\/\/www.tina.com\/blog\/wp-json\/wp\/v2\/media?parent=7230"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.tina.com\/blog\/wp-json\/wp\/v2\/categories?post=7230"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.tina.com\/blog\/wp-json\/wp\/v2\/tags?post=7230"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}